Shop with STIHL Free Next Day Delivery - BUY ONLINE
Submit Arrow Right
Selection Arborist Chain Saws

MS 201 C-M

New chain saw with M-Tronic™ technology for arborists and forestry professionals

General

MS 201 C-M
MS 201 C-M

The MS 201 C-M chain saw is the latest development in technology for arborists and forestry professionals. The STIHL M-Tronic™ technology provides easier starting with a cold/warm start recognition system that calculates the exact fuel dosage without the need for a choke position in the Master Control Lever™. There are no manual adjustments required for the fuel dosage as it is electronically calculated, while taking into account external conditions. The STIHL M-Tronic™ technology ensures fast and responsive acceleration event from a cold start and it remembers your previous settings indefinitely and restores them when you restart the chain saw - if external conditions are the same, full engine performance is immediately at your disposal every time you start. Its compact design, optimal handling and low weight make this chain saw very easy to use.

$969.99*

Versions

Featured Price

Dealers may sell for less. Pricing on all products and accessories will remain in effect until June 30, 2023. Illustrations and descriptions are as accurate as known at the time of publication and are subject to change without notice. STIHL Limited is not responsible for a printing error, the local STIHL Dealer has the final authority to set product pricing. Pricing valid at participating dealers only while supplies last.

The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Technical data

MS 201 C-M

Technical data

Technical data Value
Displacement (cc) 35.2
Power output (kW) 1.8
Weight (kg / lbs) 1) 3.9 / 8.6
Weight (kg / lb) 3.9 / 8.6
Guide Bar Lengths (Recommended ranges) 12" - 16"
Chain Oil Capacity (oz) 7.4
Fuel Capacity (oz) 10.5
Chain 63PS344E (12”) / 63PS350E (14”) / 63PS355E (16”)
Power output (kW) 1.8

1) without fuel, bar and chain

The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Features

MS 201 C-M

Standard features

  • STIHL M-Tronic (FT) Zoom
    STIHL M-Tronic (FT)

    Fully electronic controlled ignition timing and fuel metering system. The engine management STIHL M-Tronic (M) system ensures optimum engine performance, constant maximum speed and excellent acceleration. Manual carburetor adjustments are not necessary.

  • STIHL ANTI-VIBRATION SYSTEM Zoom
    STIHL ANTI-VIBRATION SYSTEM

    FOR MORE PLEASANT WORK. Vibrations can occur when you put your power tools through their paces, and these are particularly noticeable in the grip area. The buffer and spring elements of the STIHL anti-vibration system reduce the transmission of engine vibrations to the handle area and therefore to your body. The result is that your power tool is more comfortable to hold and your work is much less tiring.

  • Reduced-emission engine technology Zoom
    Reduced-emission engine technology

    2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.

  • STIHL FOUR-CHANNEL TECHNOLOGY Zoom
    STIHL FOUR-CHANNEL TECHNOLOGY

    FOR LOWER FUEL CONSUMPTION AND HIGH PERFORMANCE. Thanks to STIHL four-channel technology, you can work with your power tool with very low fuel consumption and high performance. The four overflow channels guide the fuel-and-air mixture into the cylinder in a targeted and more compressed manner, which optimally burns the fuel and significantly increases the performance of the engine.

  • STIHL ElastoStart Zoom
    STIHL ElastoStart

    Due to compression pressure, jerky stresses occur when starting internal combustion engines. The damping element in the ElastoStart special starter grip alternately absorbs and releases force according to the compression pattern. The result is smooth, even starting.

  • Tool free fuel caps Zoom
    Tool free fuel caps

    Special caps to open and close the tank cap quickly, easily and without tools.

  • STIHL Ematic System Zoom
    STIHL Ematic System

    Compared to conventional bars without Ematic, the STIHL Ematic system reduces the consumption of chain lubricant by up to 50 %, depending on the type of wood and the cutting attachment used. This system comprises a STIHL Ematic or Ematic S guide bar, a STIHL Oilomatic saw chain and a variable-flow or reduced-flow oil pump. As a result, virtually every drop of chain lubricant is delivered to exactly the right spot.

  • SIDE-MOUNTED CHAIN TENSIONING Zoom
    SIDE-MOUNTED CHAIN TENSIONING

    The tensioning screw can be found on the side of chain saw through the sprocket cover. This removes the need for contact with the sharp saw chain.

  • Single-lever master control Zoom
    Single-lever master control

    All important functions such as start, choke, throttle and stop are operated via a single lever.

  • CONTROLLED-DELIVERY OIL PUMP Zoom
    CONTROLLED-DELIVERY OIL PUMP

    The exact chain oil output can be adjusted manually for varying conditions, allowing for a reduction of up to 50%.

The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Documents

Owners manuals and safety brochures

Languages Date Link
manual icon en / fr 2018-05-03
Download PDF
Download PDF