Selection Gas Chain Saws for Forestry

MS 462 C-M

Introducing the NEW MS 462 C-M Chain Saw

General

The NEW MS 462 C-M chain saw is perfectly matched for the needs of timber harvesting. The unique design makes it suitable for limbing and working on tough slopes. Equipped with STIHL’s impressive M-Tronic™ fully electronic engine management system, regulating the ignition timing and fuel supply. Other benefits include high engine performance, fast acceleration and optimum handling.

$1,399.95*

Versions

Featured Price

* Dealers may sell for less. Pricing on all chain saws, power tools and accessories will remain in effect until December 31, 2021. Illustrations and descriptions are as accurate as known at the time of publication and are subject to change without notice. STIHL Limited is not responsible for a printing error, the local STIHL Dealer has the final authority to set product pricing. Pricing valid at participating dealers only while supplies last.

The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Technical data

MS 462 C-M

Technical data

Technical data Value
Displacement (cc) 72.2
Power output (kW) 4.4
Power output (kW) 4.4
Weight (kg / lbs) 1) 6.0 / 13.2
Weight (kg / lb) 6.0 / 13.2
Guide Bar Lengths (Recommended ranges) 16" - 28"
Chain Oil Capacity (oz) 11.5
Fuel Capacity (oz) 24.35
Chain 33RS60E (16”) / 33RS66E (18”) / 33RS72E (20”) / 33RS72E (20”) / 33RS84E (24”) / 33RS84E (24”) / 33RS91E (28”) / 33RS91E (28”) / 36RS91E (28”)

1) without fuel, bar and chain

The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Features

MS 462 C-M

Standard features

  • STIHL M-Tronic (M) Zoom
    STIHL M-Tronic (M)

    Fully electronic controlled ignition timing and fuel metering system. The engine management STIHL M-Tronic (M) system ensures optimum engine performance, constant maximum speed and excellent acceleration. Manual carburetor adjustments are not necessary.

  • Reduced-emission engine technology Zoom
    Reduced-emission engine technology

    2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.

  • Decompression valve Zoom
    Decompression valve

    The decompression valve is part of the easy starting system. The valve should be pressed before starting to reduce the compression pressure when starting, as well as the effort needed to pull the starter rope. The decompression valve is semi-automatic; it must be pressed manually before starting, but then closes automatically.

  • STIHL ElastoStart Zoom
    STIHL ElastoStart

    Due to compression pressure, jerky stresses occur when starting internal combustion engines. The damping element in the ElastoStart special starter grip alternately absorbs and releases force according to the compression pattern. The result is smooth, even starting.

  • Side-mounted chain tensioning Zoom
    Side-mounted chain tensioning

    The tensioning screw can be found on the side of chain saw through the sprocket cover. This removes the need for contact with the sharp saw chain.

  • Tool free fuel caps Zoom
    Tool free fuel caps

    Special caps to open and close the tank cap quickly, easily and without tools.

  • Pre-separation air filtration system Zoom
    Pre-separation air filtration system

    STIHL long-life air filtration systems with pre-separation achieve perceptibly longer filter life compared with conventional filter systems. Air drawn in is swirled. The larger, heavier particles are ejected. The pre-cleaned air is routed to the air filter via the pre-separator duct.

  • STIHL anti-vibration system Zoom
    STIHL anti-vibration system

    Precisely calculated buffer zones minimise the transfer of engine and saw chain vibrations to the front and rear handles. The chainsaw therefore runs noticeably smoother. This allows the user to save their strength and work longer.

The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.