Selection Gas chain saws for forestry

MS 261 C-M

Professional chain saw with M-Tronic

General

MS 261 C-M
Enlarge Find a Dealer

The legendary MS 261 professional chain saw is now available with M-Tronic™ - STIHL's electronic engine management system for optimum engine power at all times - and is part of STIHL’s new generation of fuel-efficient and low-emission chain saws. It features stratified scavenging technology that cuts fuel consumption by 20% and exhaust emissions by 50% compared to its predecessor (MS 260), inaddition to the new long-life air filtration system, patented captive nuts on the sprocket cover and side-access chain tensioner. This unit also includes anti-vibration technology and a stainless steel muffler in a durable magnesium crank case, making this trusty, efficient saw a leader in the market.

Versions

Featured Price
  • MS 261 C-M - 16'' bar
    MSRP $759.95 * Now Only $649.95 **
    Compare
  • MS 261 C-M - 18'' bar
    MSRP $784.95 * Now Only $654.95 **
    Compare
  • MS 261 C-M - 20'' bar
    MSRP $789.95 * Now Only $659.95 **
    Compare

* Dealers may sell for less. Pricing on all chain saws, power tools and accessories will remain in effect until December 31, 2019. Illustrations and descriptions are as accurate as known at the time of publication and are subject to change without notice. STIHL Limited is not responsible for a printing error, the local STIHL Dealer has the final authority to set product pricing. Pricing valid at participating dealers only.

** Dealers may sell for less. Pricing on all chain saws & blowers will remain in effect until June 30, 2019. Pricing on all other power tools and accessories will remain in effect until July 31, 2019. Illustrations and descriptions are as accurate as known at the time of publication and are subject to change without notice. STIHL Limited is not responsible for a printing error, the local STIHL Dealer has the final authority to set product pricing. Pricing valid at participating dealers only.

The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Technical data

MS 261 C-M

Technical data

Weight (kg / lbs) 4.9 / 10.8
Displacement (cc) 50.2
Featured price bar (in) 16
Guide Bar Lengths (Recommended ranges) 16" - 20"
Chain Oil Capacity (oz) 9.13
Fuel Capacity (oz) 16.9
Chain 23RS67E (16") / 23RS74E (18") / 23RS80E (20")
Power Output (kW) 3.0

The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Features

MS 261 C-M

Standard features

  • STIHL M-Tronic (M) Zoom
    STIHL M-Tronic (M)

    Fully electronic controlled ignition timing and fuel metering system. The engine management STIHL M-Tronic (M) system ensures optimum engine performance, constant maximum speed and excellent acceleration. Manual carburetor adjustments are not necessary.

  • STIHL anti-vibration system Zoom
    STIHL anti-vibration system

    Precisely calculated buffer zones minimise the transfer of engine and saw chain vibrations to the front and rear handles. The chainsaw therefore runs noticeably smoother. This allows the user to save their strength and work longer.

  • Reduced-emission engine technology Zoom
    Reduced-emission engine technology

    2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.

  • Advanced combustion technology Zoom
    Advanced combustion technology

    Four overflow channels swirl the fuel-air mix before ignition, allowing for optimum combustion and highly efficient performance. The result is lower fuel consumption and high torque across a broad rpm range.

  • Pre-separation air filtration system Zoom
    Pre-separation air filtration system

    STIHL long-life air filtration systems with pre-separation achieve perceptibly longer filter life compared with conventional filter systems. Air drawn in is swirled. The larger, heavier particles are ejected. The pre-cleaned air is routed to the air filter via the pre-separator duct.

  • STIHL ElastoStart Zoom
    STIHL ElastoStart

    Due to compression pressure, jerky stresses occur when starting internal combustion engines. The damping element in the ElastoStart special starter grip alternately absorbs and releases force according to the compression pattern. The result is smooth, even starting.

  • Tool free fuel caps Zoom
    Tool free fuel caps

    Special caps to open and close the tank cap quickly, easily and without tools.

  • Decompression valve Zoom
    Decompression valve

    The decompression valve is part of the easy starting system. The valve should be pressed before starting to reduce the compression pressure when starting, as well as the effort needed to pull the starter rope. The decompression valve is semi-automatic; it must be pressed manually before starting, but then closes automatically.

  • Compensator Zoom
    Compensator

    This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.

  • STIHL Ematic System Zoom
    STIHL Ematic System

    Compared to conventional bars without Ematic, the STIHL Ematic system reduces the consumption of chain lubricant by up to 50 %, depending on the type of wood and the cutting attachment used. This system comprises a STIHL Ematic or Ematic S guide bar, a STIHL Oilomatic saw chain and a variable-flow or reduced-flow oil pump. As a result, virtually every drop of chain lubricant is delivered to exactly the right spot.

  • Side-mounted chain tensioning Zoom
    Side-mounted chain tensioning

    The tensioning screw can be found on the side of chain saw through the sprocket cover. This removes the need for contact with the sharp saw chain.

  • Controlled-delivery oil pump Zoom
    Controlled-delivery oil pump

    The exact chain oil output can be adjusted manually for varying conditions, allowing for a reduction of up to 50%.

The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Documents

Owners manuals and safety brochures

STIHL MS 261 C-M Download PDF, 4.5 MB

Notes:

  • STIHL and VIKING online owner’s manuals are usually for the latest versions of the machine. Your product may be a slightly older production model but the manual will still be appropriate for the relevant model number.
  • The languages ​​contained in the document are also displayed in brackets, for example (GB) = English.